Home Assistant Matter Cameras in 2026.11
Check Matter camera firmware, server requirements, live view, snapshots and two-way audio in Home Assistant 2026.11.
Home Assistant 2026.11 added support for Matter 1.5 cameras. A supported camera can show a live feed and take snapshots. Before buying a camera for this setup, verify that its exact model and firmware support Matter camera pairing. Some camera hubs can expose sensors to Matter while keeping their video in the manufacturer’s app.
Check the camera and server before pairing
- Update Home Assistant. Its Matter documentation calls for Matter Server app 9.3.0 or later. For container setups, it specifies Matter Server 1.5.0 or later.
- Check the camera’s current firmware and the maker’s Matter pairing instructions. Follow Home Assistant’s Matter setup and use the camera’s Matter code or the sharing flow from the ecosystem where it is already paired.
- Open the camera entity. Test live view and take a snapshot from the dashboard you will use. Repeat the check on the devices where people will actually watch the feed.
Decide which features you need to keep
| Feature | What to verify |
|---|---|
| Live view | The feed opens on your browser and network. Home Assistant uses WebRTC for Matter camera video. |
| Snapshots | The camera can capture a still image from its Home Assistant entity. |
| Two-way audio | Turn on the preview under Settings → System → Labs. Open Home Assistant over HTTPS and give the browser microphone permission. |
| Recording history and camera controls | Confirm how your exact model handles recording, storage, pan and tilt and any vendor-specific detection features. Keep the maker’s app handy for functions your Home Assistant setup does not expose. |
If you’re comparing Aqara models, check Aqara’s current feature support first. The Camera Hub G350 documentation says the features exposed through Matter depend on the ecosystem. Use Findory’s G350 vs. G5 Pro comparison for placement, power and recording considerations. See the Matter, Thread, Wi-Fi and Zigbee guide for background on how devices connect.
Diagnose the problem by where setup stops
If Home Assistant never offers camera controls after pairing, start with the camera’s firmware and the Matter Server version. Check the maker’s documentation for a native Matter camera setup. A hub or bridge can pair successfully while leaving the camera stream in its own app.
If you can take snapshots but cannot get a live picture, test from the browser and network you normally use. Note whether the problem appears on one browser or across devices before changing camera settings. If the picture works but talk does not, check Labs, the HTTPS address and microphone permission separately.
Before mounting a new camera, test from its intended viewpoint and confirm whether you can retrieve a recording when you need it. Findory’s Aqara Camera Hub G350 product page explains its different viewpoints and storage options. Verify the video and control features you need in the ecosystem you plan to use.
Sources: Home Assistant Matter integration · Home Assistant 2026.11 release notes. Checked 16 November 2026. These setup details come from public documentation.
This article may contain affiliate links. If you purchase through them, Findory may earn a commission at no extra cost to you. Read our disclosure.
